How to Get GWP’s $4,000 Heat Pump Water Heater Rebate

If your home is on Glendale Water and Power and you swap a gas water heater for an ENERGY STAR heat pump model, GWP will send you a $4,000 check. You’ll need finaled plumbing and electrical permits from the city, and you have 12 months from the purchase date to apply.

GWP bumped the rebate to $4,000 and calls it a limited-time amount, paid while funds last. If an old gas tank is on its last legs, it’s worth pricing out now.

Who qualifies

Here’s what GWP’s Home Energy and Water Saving Rebates page requires:

  • You are a GWP customer, and the water heater goes into a home GWP serves.
  • You are replacing an existing natural gas water heater. Swapping an old electric tank for a heat pump doesn’t qualify for this one.
  • The new unit meets current ENERGY STAR guidelines.
  • You have a finalized gas capping/fuel switching plumbing permit and an electrical permit from Glendale Building and Safety.
  • It’s one rebate per customer at the same home every 10 years.

You’ll also see these called “hybrid electric” water heaters. ENERGY STAR says that’s just another name for the same thing, so go by its label.

How much you get

RebateAmountHow it’s paid
Heat pump water heater, replacing gas$4,000Paper check
Electric panel upgrade, paired with the water heater$1,000Paper check

The panel rebate has its own application. It only counts when it’s paired with a heat pump water heater or heat pump HVAC install, and it needs its own finaled electrical permit for the panel work.

Two more rules to keep in mind. The rebate can’t be more than what you paid for the product. And GWP says rebates aren’t guaranteed until they’re verified, and the program can change or end without notice.

How to apply, step by step

  1. Pick a qualifying model. Check the ENERGY STAR heat pump water heater page before you buy.
  2. Pull the permits. You need the plumbing permit for capping the gas line and the electrical permit. Add a panel permit if you’re upgrading the panel too.
  3. Get the permits finaled. The rebate is tied to finished, signed-off permits, not just issued ones. Keep the paperwork and your receipt.
  4. Apply online. Applications go through GWP’s customer programs portal, where you register as a new applicant. Do it within 12 months of the purchase date.
  5. Watch the mail. This rebate comes as a paper check, not a bill credit.

Questions go to GWP at 855-550-4497 or GWPCustomerService@GlendaleCA.gov.

What about the federal tax credit?

The IRS says the energy efficient home improvement credit covered improvements made through December 31, 2025. So for a water heater going in now, GWP’s rebate is the incentive to plan around.

Other GWP rebates worth a look

The same page lists electric swaps for other gas appliances, including $400 for an electric range and $400 for an ENERGY STAR heat pump clothes dryer, each with its own permit rules. If you drive electric, see our post on whether GWP can help pay for a home EV charger. And if your water bill is on your mind, here’s what’s going on with GWP’s proposed water rates for 2027.

Quick answers

How much is GWP’s heat pump water heater rebate?

$4,000, paid as a paper check. GWP lists it as a limited-time amount, available while funds last.

Do I need permits to get the rebate?

Yes. GWP requires a finalized gas capping/fuel switching plumbing permit and an electrical permit from Glendale Building and Safety.

Can I get the rebate if I’m replacing an electric water heater?

No. This rebate is for replacing an existing natural gas water heater with a heat pump model.

How long do I have to apply?

Up to 12 months from the date of purchase.

Leave a Comment